NEXO LIQUI-FLASH is a high performance, moisture curing liquid applied flashing and sealant designed to ensure a clean and easy application over horizontal and vertical surfaces. The low VOC, non sag formula has been designed to deliver tenacious adhesion to the most common construction substrates.
NEXO LIQUI-FLASH is used for a variety of applications including fluid applied flashing, expansion joints, precast concrete panel joints, window and door perimeters, aluminum, masonry and vinyl siding.
- Color: Gray
- Available in 5 gallon and 2 gallon pails
- Forms a highly durable, flexible bond
- Flashing membrane formula won’t shrink or stain
- Complies with AAMA 714-15
- Use for Interior and Exterior
- Use for Vertical & Horizontal Surfaces
- Low VOCs
- Can be applied in a wide range of temperature and weather conditions
- (-40° F to 140° F)
- Aggressive Adhesion to Common Construction Substrates
- Paintable in 2 Hours
- No Solvents
Surface Preparation
The surface must be clean and free of any frost, oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to application.
Directions
Carefully read and understand technical data sheet completely before beginning installation. Always do a test area to ensure product effectiveness and to become familiar with proper application techniques.
Storage
Material is to be stored under a controlled and dry environment (below 75° F). Use within 10 months from date of manufacture. For best results, keep material in tightly closed containers when not in use. Do not freeze.
For ordering and additional product Information call:
Caliber Supply, LLC
Phone (480) 336-8342